SOLUTION / WORKBENCH

WORKBENCH

Setup consists of:

• ● Consists of dissipative laminate on both the top and bottom
  surfaces of the board, giving it extra protection against charges.
• ● The entire wood below the dissipative laminate is integrated with
  carbon particles, making the worktop volume conductive.
• ● The base structure is made of extruded aluminum profiles with high-grade
  anodization, which is rust-proof for a lifetime.
• ● No failures during ESD audits and calibrations.
• ● No special grounding is needed for the worktop as, due to volume conductivity,
  it’s already been connected to the base structure.
• ● Comply with both IEC 61340 and the ANSI-ESD S.20.20.2014 international standards.
• ● Future upgrades are possible.

Setup consists of:

• • Consists of dissipative laminate on both the top and bottom surfaces of the board, giving it extra protection against charges.
• • The entire wood below the dissipative laminate is integrated with carbon particles, making the worktop volume conductive.
• • The base structure is made of extruded aluminum profiles with high-grade anodization, which is rust-proof for a lifetime.
• • No failures during ESD audits and calibrations.
• • No special grounding is needed for the worktop as, due to volume conductivity, it’s already been connected to the base structure.
• • Comply with both IEC 61340 and the ANSI-ESD S.20.20.2014 international standards.
• • Future upgrades are possible.